RCA (cDNA)

Revised upon 20240724_RCA_tissue_protocol.docx.

a. Add reverse transcription step for cDNA generation.

Universal

  • Rnase Free H₂O

  • DEPC-treated ddH₂O (for buffer and solution preparation)

  • BSA (20 µg/µL) (universal stabilizer in enzyme solutions)

  • KCl (1M) (used for ionic strength in buffers)

Fixation

  • 0.1% Glutaraldehyde (GA) in 4% Paraformaldehyde (PFA)

  • 4% Formaldehyde (for postfixation)

  • BS-PEG9 (used in RCA fixation)

Washing and Dehydration

  • PBS-Tween 0.05% (for washing)

  • 80% Ethanol (for washing and dehydration)

  • 100% Ethanol (for dehydration)

  • 20X SSC Buffer (3 M NaCl, 300 mM trisodium citrate)

Permeabilization

  • 0.04% Pepsin in 0.1M HCl (for tissue permeabilization)

Reverse Transcription

  • RT-reverse transcriptase buffer (10x)

  • RNase Inhibitor (40 U/µL)

  • dNTPs mix (10 mM) (for reverse transcription reaction)

  • LNA primer / Random decamers (100 µM) (as primers for reverse transcription)

  • TranscriptMe reverse transcriptase (5 U/µL or 20 U/µL)

Probe Hybridization

  • tRNA (Ambion AM7119) (10 µg/µL) (used during blocking to prevent nonspecific probe binding)

  • Probes oligo (10 µM)

  • Formamide deionized (100%) (for hybridization buffer)

  • Ampligase Buffer (10x)

Ligation

  • SplintR (NEB) (25 U/µL)

  • SplintR Buffer (10x)

RCA (Rolling Circle Amplification)

  • Phi29 DNA Polymerase (10 U/µL)

  • Phi29 Buffer (10x)

  • Glycerol (100%) (used in RCA buffer)

  • NH₂-dUTP (2 mM) (nucleotide for amplification)

  • RCA Primer 1+2 (10 µM for both) (primers for rolling circle amplification)

All concentrated buffers are provided together with enzymes and stored according to vendor specification.

  • Phosphate Buffered Saline (1x PBS): 137 mM NaCl, 10 mM sodium phosphate, 2.7 mM KCl, and DEPC-ddH₂O, pH 7.4.

  • Washing buffer (PBS-T): 0.05% Tween 20 in 1x PBS.

  • Saline-sodium citrate buffer (20x SSC): 3 M NaCl and 300 mM trisodium citrate in DEPC-ddH₂O, pH 7.

  • RT-mix (100 μL per chamber): 10 μL 10x RT-reverse transcriptase buffer, 2 μL 40 U/µL RNase Inhibitor, 1 μL 20 µg/µL BSA, 5 μL 10 mM dNTPs mix, 5 μL 100 µM LNA primer or Random decamers, TranscriptMe reverse transcriptase, Fill up to 100 μL with DEPC-ddH₂O.

  • Hybridization mix (100 μL per chamber): 5 μL 20x SSC, 10 μL 100% formamide, 2 μL tRNA (Ambion AM7119), Fill up to 100 μL with DEPC-ddH₂O.

  • Ligation mix (100 μL per chamber): 10 μL 10x SplintR Buffer, 2 μL 25 U/μL SplintR (NEB), 5 μL 10 U/µL RNase H, 1 μL 20 µg/µL BSA, 5 μL 1M KCl, 20 μL 100% formamide, Fill up to 100 μL with DEPC-ddH₂O.

  • RCA mix (100 μL per chamber): 10 μL 10x Phi29 DNA polymerase buffer, 5 μL 50% glycerol, 2 μL 10 µg/µL BSA, 2.5 μL 2 mM NH₂-dUTP, 3 μL + 3 μL RCA Primer 1+2 (10 µM each), Fill up to 100 μL with DEPC-ddH₂O.

****

  1. fixation of the slides (~60min)

i. Incubate the slides in 200ul 0.1% GA in 4% PFA for 1**5-30 min**

Freshly prepare: 1µL 50% GA + 500 µL PFA

ii. Wash the slides in 200ul 1 x 2 min PBS-Tween 0.05%

iii. Wash the slides in 200ul 80% EtOH

iv. Assemble the PDMS chamber to glass slide

v. Wash the slides in 50 ul 1 x 2 min PBS-T

  1. Permeabilization of the tissue (~10min)

i. Incubate the slides in 0.04% pepsin in 0.1M HCl at 37°C for 2 min

ii. Wash the slides for 1 x 2 min with PBS-Tween 0.05%

  1. Dehydration (~20min)

i. Incubate the slides in 80% ETOH for 10 min

ii. Incubate the slides in 100% ETOH for 2 min

iii. wash the slides for 3 x 2 min PBS-Tween 0.05% for rehydration.

****

  1. Reverse transcription (~2h)
Reagents Stock Final 1 x slide x slides
Rnase Free H₂O - -
RT-reverse transcriptase buf. 10x 1x 10 μL
RNase Inhibitor 40 U/μL 0.8 U/μL 2 μL
BSA 20 μg/μL 0.2 μg/μL 1 μL
dNTPs 10 mM 0.5 mM 5 μL
Hexamer random primer 100 μM 5 μM 5 μL
Reverse transcriptase 5 U/μL 0.5 U/μL 10μL
Total

i. Apply the RT mix(above) to the chamber, mix by gentle pipetting (3-5 times), and incubate the slides at 42°C for 2h.

The optimal incubation time needs to be determined experimentally. Typically, 1h is sufficient when using LNA-modified target-specific primers, while RT with random decamers is conducted overnight.

ii. Wash the slides for 1 x 2 min with 1X PBS-T.

  1. Postfixation

i. Incubate the slides in 4% PFA for 30 min.

ii. Wash the slides for 2 x 1 min with 1X PBS-T.

At this point, the protocol can be halted, and samples can be stored for a few days at 4°C in 1X PBS.

  1. Blocking (30min)
Reagents stock final 1 x slide x slides
Rnase Free H₂O
Ampligase Buffer 10x 1x 10μl
KCl 1M 0.05M 5μl
Formamide deionized 100% 20% 20μl
Probes oligo 10μM 0.05μM 1μl
BSA 10μg/μl 0.2μg/μl 2μl
RiboLock (Thermo) 40U/μl 1U/μl 2.5μl
tRNA (Ambion AM7119) 10μg/μl 0.2μg/μl 2μl
Total 100μl

i. Add the blocking solution into the chamber, mix by gentle pipetting (3-5 times) and incubate the slides at room temperature (RT) for 30 min.

At this point, the protocol can be halted, and samples can be stored for a few days at 4°C in 1X PBS.

  1. Hybridization of Padlock probes (3h)
Reagents stock final 1 x slide x slides
Rnase Free H₂O
Ampligase Buffer 10x 1x 10μl
KCl 1M 0.05M 5μl
Formamide deionized 100% 20% 20μl
Probe 0.2μM
BSA 10μg/μl 0.2μg/μl 2μl
RiboLock (Thermo) 40U/μl 1U/μl 2.5μl
tRNA (Ambion AM7119) 10μg/μl 0.2μg/μl 2μl
Total 100μl

i. Add the solution into the chamber, mix by gentle pipetting (3-5 times) and seal.

ii. Incubate the slides at 55°C for 18 min for denaturation and at 45°C for 120 min for hybridization of the probes onto the target mRNA.

iii. Wash the slides for 3 x 10 min with washing buffer (10% formamide in 2X SSC) to remove unhybridized probes. 100µL 20X SSC + 100µL formamide + 800µL H₂O.

iv. Wash the slides for 3 x 1 min with PBS-Tween 0.05% to remove the remaining formamide, as it can deactivate the enzyme in the following step.

At this point, the protocol can be halted, and samples can be stored for a few days at 4°C in 1X PBS.

  1. Ligation of Padlock probes (~2h)

The ligation of the hybridized padlock probes is mediated by T4 DNA Ligase

Reagents stock final 1 x slide x slide
RNase Free H₂O
T4 Buffer 10X 1X 10 ul
BSA 10 ug/ul 0.2 ug/ul 2 ul
T4 DNA ligase (ThermoFisher, EL0011) 25 U/ul 2.5 U/ul 10 ul
Total 100 ul

i. Add the solution into the chamber, mix by gentle pipetting (3-5 times) and seal

ii. Incubate the slides at 37°C for 2 hours

iii. Wash the slides for 2 x 1 min with PBS-Tween 0.05%.

At this point, the protocol can be halted, and samples can be stored for a few days at 4°C in 1X PBS.

  1. Rolling circle amplification (RCA, ~3h-17h)
Reagents stock final 1 x slide x slide
RNase Free H₂O 64.5 ul
Phi29 Thermo 10 U/ul 0.25 U/ul 2.5ul
Phi29 Buffer 10X 1X 10 ul
Glycerol 100% 0.2 ug/ul 10 ul
dNTPs 10 mM 0.25 mM 2.5 ul
NH₂-dUTP 2 mM 0.05 mM 2.5 ul
BSA 10 ug/ul 0.2 ug/ul 2 ul
RCA Primer 1+2 10uM for both 0.3uM for both 3 + 3 ul
Total 100 ul

i. Add the solution into the chamber, mix by gentle pipetting (3-5 times) and seal

ii. Incubate the slides at 30°C for 12-16 hours (For 2h, need to incubate at 37C)

iii. Wash the slides for 2 x 1 min with PBS-Tween 0.05%.

iv. Add 0.2% PEG9 in PBS-T mix by gentle pipetting (3-5 times) and incubate for 15-30 min at RT to fix the RCA products on the tissue.

Freshly prepare: 2µL PEG9 BS + 98µL PBS-T

v. Wash the slides for 3 x 1 min with PBS-Tween 0.05%.

vi. Wash the slides for 3 x 2-10 min with 65% formamide at 30°C on a PCR machine block or an Eppendorf Thermostat. 650 µL Formamide + 350 µL H₂O

vii. Wash the slides for 2 x 1 min with PBS-Tween 0.05%

At this point, the protocol can be halted, and samples can be stored for a few days at 4°C in 1X PBS.